Otros
Otros
Comparative Investigation of the Tribological and Electrochemical Behaviors of Laser‐Clad Iron‐Based, Nickel‐Based, and Cobalt‐Based Alloys on 38CrMoAl Steel: Implications for Enhancing Extruder Screw Performance
20/09/2026 -
This study compares Fe‐based, Co‐based, and Ni‐based laser‐clad coatings on 38CrMoAl steel for extruder screw applications. The coatings were evaluated in terms of microstructure, hardness,...
Nonequilibrium Interfacial Complexation Fibers With Programmable Ionic Memory
16/09/2026 -
Two aqueous polyelectrolyte droplets initiate nonequilibrium interfacial polyelectrolyte complexation (IPC) under ambient conditions, spontaneously generating multiscale fibers. Assembled into...
Inductively Expandable Supraparticles as Microscopic Force Generators for Remote Mechanical Actuation
15/09/2026 -
This study demonstrates the combination of magnetic nanoparticles and functional blowing agents into supraparticles. Upon induction heating, they actuate via rapid gas generation or extensive volume...
Turnover-driven β-diversity reveals conservation priorities in Antarctic intertidal benthic communities
17/09/2026 -
Plants balance gas exchange with pathogen defense through dynamic stomatal regulation. Stomata close temporarily during pathogen attack to limit invasion, then reopen to restore photosynthesis and...
Localized Electrochemical Deposition of Ni Microstructure With 3D‐Printed Solution Flow‐Type Microdroplet Cell
31/08/2026 -
A new 3D‐printed solution flow‐type microdroplet cell (SF‐MDC) enables highly localized electrochemical deposition of Ni microstructures on a Cu substrate. By controlling deposition parameters...
Interrupting Surface‐to‐Bulk Domino Propagation: A Thermal Failure Mitigation Strategy for Layered Oxide Cathodes
27/08/2026 -
A thermally triggered domino effect, from side reactions and propagating to bulk collapse, is identified as the origin of cathode thermal failure. The crystalline‑state composite strategy with LMFP...
Citronellal Alleviates Cognitive Impairment by Inhibiting NHE1-Mediated Mitochondrial Damage in Vascular Dementia
-
The present study aimed to explore the protective effect of citronellal (CT) on cognitive impairment and its underlying mechanism involving NHE1âdependent mitochondrial damage both in vivo...
Reinforcement Mechanism of Initial Stress on Artificial Aging of 2198 Al–Cu–Li Alloy Sheet
19/08/2026 -
The study describes the effect of initial stress on dissolution of δ′ phase and precipitation of T1 phases in artificial aging through plentiful experiments. The study elucidates the reason of...
A point-of-care testing platform for pathogen nucleic acid analysis utilizing paper-based extraction and portable qPCR
-
Rapid and reliable diagnostic methods are crucial for controlling animal disease outbreaks and reducing mortality, especially when effective drugs or vaccines are unavailable. While real-time...
Mechanically Assisted Magnetic Actuation in Ceramic‐Based Microscrolls for Fast and Durable Soft Robotic Systems
08/08/2026 -
Ceramic‐based V2O5/Fe3O4 hybrid films are shaped into butterfly‐proboscis‐inspired microscroll actuators. Magnetic triggering initiates unrolling, while geometry‐programmed elastic strain...
Effect of the Filler Metal on the Microstructure, Mechanical Properties, and Corrosion Resistance of Inconel 600 Welded Joints Using Gas Metal Arc Welding
02/08/2026 -
Welding of Inconel 600 (IN600) using different filler materials with their proper shielding gases, and gas metal arc welding (GMAW) parameters eases the fabrication of components made by IN600. These...
Comparative Study of State‐of‐the‐Art Micromixers: Mixing Efficiency and Design Recommendations
22/07/2026 -
Passive micromixers were systematically compared by CFD over Re = 1–180 to identify dominant mixing mechanisms and characteristic time scales. Vortex‐driven configurations were distinguished...
Mechanical Responses of Cold‐Rolled AM350 Under Tension: Microstructure, Phase Transformation, and Fracture Mechanism
05/07/2026 -
Dual‐phase AM350 stainless steel exhibits a distinct yield plateau and an exceptionally high work‐hardening rate under quasistatic tension. The generation and propagation of Lüders bands govern...
Influence of Graphene Oxide Nanoparticles on the Mechanical Behavior of Stereolithography Printed Polyether Ether Ketone Composites
18/06/2026 -
PEEK is blended with graphene oxide (0.25 wt %, 0.50 wt%, and 0.75 wt%), followed by printing by stereolithography to examine the effects of concentration on the microstructure and mechanical...
3D‐Printed Self‐Degrading Hydrogel Scaffold for Controlled Release of Green‐Synthesized Au/Ag Bimetallic Nanoparticles as Potential Drug Carriers
16/06/2026 -
This study develops a 3D‐printed starch–gellan gum scaffold for controlled release of green‐synthesized Au/Ag nanoparticles. The nanoparticles show strong bioactivity and cytocompatibility,...
A Simplified Laminar Flow Model for the Pultrusion of Glass Fiber/Polyethylene Terephthalate Commingled Yarns
09/06/2026 -
A simplified thermoplastic pultrusion model is developed to predict thermal fields in glass fiber/polyethylene terephthalate (GF/PET) composites with reduced computational cost. By combining...
Microstructure and Properties of Al–Ni Intermetallic Compound Coatings Prepared by Cold Spraying
30/05/2026 -
Cold‐sprayed deposits often suffer from limited phase purity due to the low‐temperature nature of the process. This study establishes a precise heat‐treatment strategy to synthesize...
Optimization of the Production of Rubber Compounds Using Mathematical Models
14/05/2026 -
Rubber compounds were mixed in a batch internal mixer, and symbolic regression was used to derive mathematical models linking recipe and process parameters to ram path, torque, and mixing quality...
Magneto‐Thermal Casson Sodium Alginate Ternary Nanofluid Flow for Agricultural Thermal Systems
15/05/2026 -
Magneto‐thermal transport in a Casson sodium alginate‐based ternary nanofluid is analyzed over an accelerated surface under the influence of Joule heating, thermal radiation, and an inclined...
