Industria 4.0
Industria 4.0
Sustainable Liquid Metal Composites for Soft Electronics and E‐Waste Reduction
19/11/2025 -
Liquid metal (LM) composites embody recyclability, repairability, renewability, and resilience (4R), offering a sustainable route for soft electronics. With exceptional conductivity, stretchability,...
Highly Robust and Intrinsic Flame‐Retardant Polyphenylene Benzodiazole/Liquid Crystal Polyarylate Composites for Flexible Triboelectric Nanogenerators in Harsh Environment
19/11/2025 -
Through interface molecular engineering design, intrinsically flame‐retardant and high‐temperature‐resistant triboelectric nanogenerator (TENG) based on polyphenylene benzodiazole fabric...
Stopping Phase Separation Enables Durable Wide‐Bandgap Photovoltaic Perovskites
18/11/2025 -
A dual‐locking polyquaternium network strategy is proposed to suppress local electric fields that drive light‐induced phase segregation. This approach enables wide‐bandgap perovskite...
Additive Manufacturing of Hot Work Tool Steel by Laser Powder Bed Fusion Utilizing Powder Mixtures Including Grinding Chips: Assessing Chemical Homogeneity and Achievable Hardness
16/11/2025 -
Grinding chips of high‐alloyed steel are prepared to be admixed to a starting powder mixture for laser powder bed fusion. A three‐stage preparation is performed, including washing in acetone,...
Scalable Robotic Laser Texturing of Tilted Microanchors for Direction‐Independent Metal–Polymer Joining
16/11/2025 -
A robot‐assisted laser processing method is proposed that enables the formation of surface‐tilted microanchors on metal substrates to improve metal–polymer joining. Using a six‐axis robotic...
Adjustable Energy Absorption of Triply Periodic Minimal Surface Structures via Additively Reconfigurable Manufacturing‐Based Investment Casting
16/11/2025 -
This figure compares the specific energy absorption (SEA)–density performance of modular TPMS structures with conventional cellular architectures. Unlike typical lattices that perform at low...
Anti‐Creep Adhesive Tapes via Trapped‐Entanglement‐Regulated Topological Networks
17/11/2025 -
Under continuous external force, creep deformation occurs on the adhesive joint insidiously, which will gradually result in failure. Authors introduce topological trapped entanglements to build a...
High Thermal Conductivity Porous Organic Polymers with Low Permittivity via Desolvation‐Induced Self‐Assembly
16/11/2025 -
This work develops porous polyacrylonitrile (P‐PAN) films via PEG‐induced desolvation. This strategy creates uniform micropores (reducing permittivity to 1.44, ‐73.1%) while simultaneously...
Interfacial Microstructure and Mechanical Properties of Ti‐6Al‐4V/Ni‐Ti Bimetallic Structures Fabricated by Multi‐Wire Arc Additive Manufacturing
09/11/2025 -
As‐built wall consists of NiTi2, NiTi, and α‐Ti. As‐built wall exhibits a peak microhardness of 692.2 HV, a compressive strength of 1137.5 MPa, and a fracture strain of 6.7%. Fractographic...
Closed‐Loop and Sustainable 4D Printing of Multi‐Stimuli‐Responsive Sulfur‐Rich Polymer Composites for Autonomous Task Execution (Adv. Mater. 44/2025)
06/11/2025 -
Closed‐Loop and Sustainable 4D PrintingIn their Research Article (DOI: 10.1002/adma.202507057), Dong‐Gyun Kim, Jeong Jae Wie, Yong Seok Kim, and co‐workers report the first closed‐loop and...
Recent Progress in Preparation, Improvement and Applications of Green Polymer Composites
08/11/2025 -
ABSTRACTGreen polymer composites (GPCs) are increasingly recognised as sustainable alternatives to traditional petroleum‐based materials, effectively addressing critical environmental challenges,...
Magnetoactive Metamaterials: A State‐of‐the‐Art Review
04/11/2025 -
Magnetoactive metamaterials combine magnetoactive composites with architected metastructures to enable contactless, tunable control of mechanical, acoustic, and elastic properties. This review...
Melt Spinning Preparation of Conductive, Elastic, and Harsh Condition‐Tolerant Covalently Cross‐Linked Fibers for Triboelectric Nanogenerator
30/10/2025 -
Covalently cross‐linked polyurethane conductive fibers prepared by melt spinning are developed, which have excellent high temperature and solvent resistance. As a negative dielectric material, it...
Additive Manufacturing of Molecular Architecture Encoded Stretchable Polyethylene Glycol Hydrogels and Elastomers
29/10/2025 -
Bottlebrush molecular architecture prevents the crystallization of high molecular weight polyethylene glycol (PEG) based polymers, enabling highly stretchable photocurable PEG hydrogels and...
Mechanical Characterization of 3D Printed Honeycombs with Planar Ribs for Enhanced Energy Absorption
23/10/2025 -
Novel honeycomb metamaterials are designed and fabricated with internal planar ribs to enhance their mechanical properties for engineering applications. An integrated experimental and computational...
Universal Water Transfer Printing Enables Scalable Structural Coloration of Responsive Textile Fibers for Wearable Electronics
25/10/2025 -
Meter‐long core‐multishelled electronic fibers are judiciously fabricated via the integration of water transfer printing and coaxial extrusion, which consist of radially aligned CLC photonic...
Multidimensional Additive Manufacturing for Perovskite Optoelectronic Devices
23/10/2025 -
Additive manufacturing (AM) enables multidimensional (0D to 4D) perovskite optoelectronics, overcoming the limitations of conventional fabrication methods such as spin coating. This review covers...
