Envase
Envase
Ultrasonic Punching with Inkjet?printed Dot Array for Fabrication of Perforated Metal Pattern as Transparent Heater
29/05/2024 -
This study introduces an aluminum transparent heater manufactured with a perforated pattern by using inkjet printing process. The polymeric sacrificial layer was deposited in a periodic dot...
RuAl thin film deposition by DC magnetron sputtering
29/05/2024 -
The intermetallic transition metal B2 structured aluminide RuAl is a candidate material for use in various applications, including microelectronics and structural materials under demanding...
Wearability Analysis of Ag Nanoparticle-Loaded Cotton Fabric Modified by SPEEK/PVA Blend Polymer
28/05/2024 -
The antibacterial silver nanoparticles (Ag NPs)-loaded cotton fabric modified by SPEEK/PVA film was prepared by photo-induced method with 350 nm UV light irradiation. Its wearable properties,...
Facile way of preparing PMMA@TiO2@SiO2 (P@T@S) composite microspheres with high haze and light transmittance for diffusion film
24/05/2024 -
Multivariable recycling process of a post?industrial polypropylene.AbstractThis study provides key insights into the extrusion of a post?industrial feedstock primarily composed of polypropylene (PP)...
In Situ Preparation of Superconducting Infinite?Layer Nickelate Thin Films with Atomically Flat Surface
25/05/2024 -
The superconducting infinite?layer nickelate films can be synthesized fully in vacuo${\mathrm{\text{in vacuo}}}$ using atomic hydrogen, while the atomically flat surface has been confirmed by atomic...
Novel Palladium Hydride Surface Enabling Simultaneous Bacterial Killing and Osteogenic Formation through Proton Capturing and Activation of Antioxidant System in Immune Microenvironments
27/05/2024 -
A palladium hydride (PdHx) film, fabricated on titanium implants, exhibits a lattice capable of capturing protons within the bacterial microenvironment, consequently inducing bacterial death....
Observation of Ultrahigh Photoconductivity in DNA?MoS2 Nano?Biocomposite
25/05/2024 -
This work demonstrates the observation of ultrahigh photoconductivity in DNA?MoS2 nano?biocomposite film. This is achieved by utilizing DNA?MoS2 hydrogel formation by incorporating a MoS2 network in...
Effect of Keratin Waste on Poly(??Caprolactone) Films: Structural Characterization, Thermal Properties, and Keratinocytes Viability and Proliferation Studies
02/05/2024 -
Keratin extracted (KE) from chicken feathers was used for the production of composite films comprising poly(??caprolactone) (PCL) and keratin (PCL/KE films). The process involved the extraction of...
Effects of SiO2 Nanoparticles on Polyvinyl Alcohol/Carboxymethyl Cellulose Polymer Blend Films’ Structural, Wettability, Surface Roughness, and Optical Characteristics
07/05/2024 -
The blend matrix composed of polyvinyl alcohol and carboxymethylcellulose (PVA/CMC) was prepared via the casting method. SiO2 nanoparticles were added as reinforcement in different amounts (SiO2?=?1,...
Cure characteristics and mechanical properties of natural rubber vulcanizates filled with untreated pyrolytic tire char
23/05/2024 -
Diffusion particles fabricated via in?situ combining PMMA microspheres and nanoparticles through electrostatic attraction display considerably different optical diffusion effects in prepared...
Water?based Polyurethane Heating Film with Double?Layer Conductive Network for a Rapid Electrothermal Response
21/05/2024 -
Carbon?based composite materials have garnered widespread attention in the field of Personal Thermal Management (PTM). In these applications, constructing conductive fillers with a highly...
Air?Processed Perovskite Solar Cells with >25% Efficiency and High Stability Enabled by Crystallization Modulation and Holistic Passivation
22/05/2024 -
Organic semiconductors (e.g., PCBM and IDIC) frequently serve as interface passivants for perovskite solar cells (PSCs) due to their beneficial passivation effects on perovskite interfaces. However,...
Synthesis, Evaluation, and Electrochemical Detection Application of Magnetic Molecularly Imprinted Polymers for 4,4??Methylenedianiline from Food?Contact Materials
13/06/2023 -
Magnetic molecularly imprinted polymers (MIPs) capable of selectively recognizing and absorbing 4,4??methylenedianiline (MDA) were successfully synthesized, using Fe3O4 coated with mesoporous silicon...
Fabrication of Graphene Oxide Reinforced Biocomposite: Recycling of Postconsumed Footwear Leather
28/09/2023 -
The increasing concerns about solid waste disposal have led to the development of innovative strategies for repurposing waste materials. This paper describes a simple solution casting process for...
Polylactic Acid?Based Film Modified with Nano?Ag?Graphene?TiO2: New Film versus Recycled Film
25/11/2023 -
The increase in the polymer?based materials needs has induced along the waste accumulation, thus argued higher interest in recycling. The study aims to assess the structural, morphological,...
Removal of Dye from Wastewater Using a Novel Composite Film Incorporating Nanocellulose
20/01/2023 -
Research shows that the composite material is used as an adsorbent to remove pollutants from wastewater. This work is aimed at producing a novel composite film comprising chitosan, polyvinyl alcohol,...
Transmittance estimation of translucent polymeric pellets
20/05/2024 -
Plastics are commonly produced and sold in pellet form due to their superior handling characteristics. However, due to their small size, it is often impractical, if not unfeasible, to determine the...
Diaminodiphenylmethane modified zirconium phosphate: A new strategy for trace addition to improve flame retardancy, smoke inhibition, and compatibility of epoxy resins
20/05/2024 -
Mechanism of film formation and extinction.AbstractA green method to synthesize self?matting waterborne polyurethane acrylic hybrid emulsion with hydrophobic function is introduced in this study. A...
Tuning the mechanical and thermoelectric properties of self?standing stretchable PEDOT:PSS/SDBS films
18/05/2024 -
Epoxy vitrimer materials based on imine bondsAbstractVitrimer materials have machinability and stability because of their shape remodeling and self?healing properties at high temperatures. This...
A novel and biocompatible photopolymerizable resin based on cyclohexanedimethanol?dimetacrylate designed to light?print microneedles
20/05/2024 -
This work presents a sustainable polyurethane?acrylate prepolymer (NIPUA) efficiently derived from palm olein without the use of isocyanates, under atmospheric conditions. The NIPUA is served as a...
Preparation and performance evaluation of intelligent plugging agent for thermo?sensitive water?based drilling fluid
20/05/2024 -
Poly(vinylidene fluoride)/ceramic composite.AbstractFerroelectric flexible polymer composite films of poly(vinylidene fluoride) (PVDF) with different weight percentages (10.0%, 20.0%, 30.0%, 40.0%,...
