Otros
Otros
Graphene Nanoplatelets/Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties
27/05/2024 -
The addition of GNP filler into an insulative PLA matrix, above the percolation threshold (7 wt %), has successfully developed a continuous conductive network. The electrons can move freely within...
Effects of incident heat flux on heat release rates and temperatures in cone calorimeter tests of polyurethane foam
29/05/2024 -
There is great interest in developing methods to predict full?scale fire performance of mattresses and upholstered furniture for design and regulatory purposes using cone calorimeter and other...
Tough bilayer thermo?responsive hydrogel actuator reinforced by Fe3+ complexation
22/05/2024 -
Fibrication of nanoparticles from quince apple and then tranforming into magnesium hydroxide embidded polyurathane nanofibers with chitosan using hydrohernal reactor.AbstractThe study aimed to...
Facile way of preparing PMMA@TiO2@SiO2 (P@T@S) composite microspheres with high haze and light transmittance for diffusion film
24/05/2024 -
Multivariable recycling process of a post?industrial polypropylene.AbstractThis study provides key insights into the extrusion of a post?industrial feedstock primarily composed of polypropylene (PP)...
Design, Fabrication, and Characterization of 3D?Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces
04/01/2024 -
The present work investigates the influence of material phases and their volume fractions on the elastic behavior of triply periodic minimal surface (TPMS) scaffolds for the potential modeling of...
Fluoro?Ethylene?Carbonate Plays a Double?Edged Role on the Stability of Si Anode?Based Rechargeable Batteries During Cycling and Calendar Aging
22/05/2024 -
This work investigates the underlying mechanisms that cause calendar aging effects in Si anode?based Li ion batteries. Plasma focused ion beam tomography reveals the formation and growth of a...
The Properties of Tannery Waste Addition as a Filler Based on Two Types of Polymer Matrices: Poly(Butylene Adipate?Co?Terephthalate) (PBAT) and Poly(Butylene Succinate) (PBS)
26/05/2023 -
Wet blue leather is a waste produced by the leather industry. It is a difficult waste product to dispose of, and if not disposed of properly, it will affect the environment and cause toxicity....
Durable Flame?Retardant Cotton Fabric Modified by a Novel Reactive P?N Intumescent Flame Retardant
07/07/2023 -
A novel reactive P?N intumescent flame retardant tetroxo (3?triethylphosphine?5?chlorine?1?triazine) neopentane (TTCTN) was prepared, and its structure was determined by Fourier transform infrared...
Simulation Method for Rubber Compounding under Isothermal Partial Filling Conditions
03/11/2023 -
Rubber mixing is an important link in the production of rubber products. Computational fluid dynamics (CFD) simulation is often used to explore the effect of rubber mixing parameters on rubber mixing...
Preparation and Property Study of PA56/POE?g?MAH?GMA/PPO Ternary Alloy
05/12/2023 -
Bio?based PA56 is as matrix resin, maleic anhydride (MAH), and glycidyl methacrylate (GMA) dual monomer grafted POE (POE?g?MAH/GMA) polyphenyl ether(PPO) are simultaneous as toughening agents. The...
Measurement Techniques and Methods for the Pressure Coefficient of Viscosity of Polymer Melts
18/12/2023 -
Viscosity is a prominent rheological property of polymer, which is affected by temperature, pressure, shear rate, molecular structure, and other factors. Despite the importance of the pressure...
Influences of Nanosilica Particles on Density, Mechanical, and Tribological Properties of Sisal/Hemp Hybrid Nanocomposite
15/05/2023 -
Focusing on natural fibers are the prominent substitution for synthetic fiber and reinforced into polymer matrices found unique properties such as lightweight, cost?effectiveness, and good mechanical...
Fused Deposition Modeling of Single?Use Plastic Alloy
14/02/2023 -
Packaging plastics are called ‘single?use plastics’ because of short lifetime. Among which, the three plastics of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) take...
Impact of Artificial Weathering on Swimwear Fabric
23/05/2024 -
Lately, being physically active has become a priority of daily life. Despite that outdoor sports boost an individual’s mental and physical health, it also generates the problem of ultraviolet...
Diaminodiphenylmethane modified zirconium phosphate: A new strategy for trace addition to improve flame retardancy, smoke inhibition, and compatibility of epoxy resins
20/05/2024 -
Mechanism of film formation and extinction.AbstractA green method to synthesize self?matting waterborne polyurethane acrylic hybrid emulsion with hydrophobic function is introduced in this study. A...
Preparation and performance evaluation of intelligent plugging agent for thermo?sensitive water?based drilling fluid
20/05/2024 -
Poly(vinylidene fluoride)/ceramic composite.AbstractFerroelectric flexible polymer composite films of poly(vinylidene fluoride) (PVDF) with different weight percentages (10.0%, 20.0%, 30.0%, 40.0%,...
Coin?Shaped Carbon Prepared with Cerbera manghas Fibers via Multistage Carbonization and Activation for High?Performance Symmetrical Supercapacitors
17/05/2024 -
Cerbera manghas fibers are the first?time pure biomass to derive inexpensive carbon with nanofiber structure.The resulting carbon electrode produces a nanofiber structure that can be controlled with...
Development and Evaluation on Thermoregulating Sleeping Bags with Phase Change Viscose Fiber
17/05/2024 -
Sleeping bag can protect the human body keeping warm effectively in the cold environment. Among the many varieties sleeping bags, phase change thermoregulating sleeping bag is an innovative...
Effect of heat treatment on the radial structure of coaxial polyacrylonitrile/mesophase pitch composite fiber
15/05/2024 -
AbstractBasalt fiber reinforced polypropylene composites with two initial fiber lengths (3.2 and 6.4?mm) were fabricated using twin?screw extrusion compounding. In the case of composites with smaller...
Polyimide nanocomposites for high?temperature capacitive energy storage applications by incorporating functional graphene oxide nanosheets: Design, preparation, and mechanism
15/05/2024 -
Fabrication process of EVD/CNT epoxy vitrimers by dynamic crosslinking.AbstractCarbon nanotubes (CNT) is an ideal candidate for reinforced epoxy vitrimer composites, however, achieving a desirable...
Nature?Inspired Helicoidal Nanocellulose?Based Multi?Compartment Assemblies with Tunable Chiroptical Properties
03/05/2024 -
The combination of layer?by?layer assembly and grazing incidence spraying is used to fabricate organized nanocellulose?based structures with nanoscale controlled helicoidal arrangement of cellulose...
